Tenacious E3800 Resilient Polyurethane Anti-Slip Adhesive Tape (25mm x 20m) - 1 Roll

A cloth backed Grey Polyurethane with a skived finish and coated with a solvent acrylic adhesive system. For use on Floors, Stairways, Ladders & Gangways etc. to stop slipping. The special skived PU backing works well when dry or wet and yet will not abrade skin or clothes, so is well suited to barefoot areas (bathrooms, changing rooms) and situations where conformability to surfaces and versatility to different substrates is required.

Technical Data

Gauge: 1.0mm ( /- 0.2mm)
Tensile Strength: 250 N/cm
Adhesion to Steel: 3.9 N/cm
Service Temperature -10°C to 60°C
Storage Temperature 15°C to 25°C
Shelf Life: 12 Months

** Manufactured under ISO 9002/CNS 12682

Surface Preparation

The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage

Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

DISCLAIMER:

Values: All values presented have been determined by standard test methods and are average values only.
Recommendations: Whilst we are happy to recommend products from our range for applications, it is imperative that the customer/user complete their own tests to determine suitability for their application under “working conditions” and if longevity is important, that ageing tests be carried out.
Warranty: We can only warranty our products to the level that they are consistent with our Product Information Sheet values

BUT CANNOT accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations.

NOTE 1: AVAILABLE IN CARTON QUANTITY OF 12 ROLLS
NOTE 2: ALSO AVAILABLE IN 50MM WIDTH